Santa Barbara Instrument Group ST-8300C, Operating Manual

Page: 2 / 48

ST-8300 Operating Manual v. 1.2
December 2009
Very Important :
Before you attach the ST-8300 to your computer for the first
time you MUST install the software as described Section 2.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the receiver and the equipment.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
Shielded I/O cables must be used when operating this equipment.
•
You are also warned, that any changes to this certified device will
void your legal right to operate it.