background image

9

AC Outlet

AC Plug

If the polarized AC Plug does not fit into a
non-polarized AC Outlet, do not attempt to
file or cut the blade. It is the user's
responsibility to have an electrician replace
the obsolete outlet.

Avoid extreme moisture and dust.

The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.

Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.

Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the VCR or use forced air to remove dust.

When you finish operating the VCR, always unload
the cassette and turn off the power.

When you leave your home for a long time, unplug
the AC power cord.

To protect the VCR from a lightning storm, unplug
the AC power cord from the wall outlet and
disconnect the antenna.

POWER SOURCE

Keep the VCR away from flower vases, sinks, etc. If
liquids should be spilled into the VCR, serious
damage will result. If you spill any liquids into the
VCR, unplug the AC power cord immediately and
consult qualified service personnel before attempting
to use the VCR again.

 4C73101B(C-09)

17/9/99, 4:14 PM

9

Summary of Contents for VCR2510A



















































Reviews: