Sansui LT-22AM21 Owner'S Manual Download

Page: 12 / 56

Cable TV connections

For basic Cable TV service not requiring a Converter/

Descrambler box, connect the 75 ohm Coaxial Cable directly

to the Antenna Jack on the back of the TV.

For subscribers to scrambled Cable TV service

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect

the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial

Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the

connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel

3 or 4) and use the Converter/Descrambler box to select channels.

For subscribers to unscrambled Cable TV service with scrambled premium

channels

If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require

the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available

from the Cable TV company or an electronics supply store). Follow the connections shown below. With the

switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the

“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the

Converter/Descrambler box to tune scrambled channels.

This TV has an extended tuning range and can tune most cable channels without using a Cable TV

Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.

Descrambling these signals for normal viewing requires the use of a descrambler device which is

generally provided by the Cable TV company.

For subscribers to basic Cable TV service

Incoming

75 ohm

Cable TV

Cable

75 ohm Cable to TV

Antenna

Jack

Converter/

Descrambler

Splitter

Incoming

75 ohm

Cable TV

Cable

A/B Switch

75 ohm Cable to TV

Converter/

Descrambler

Antenna

Jack

75 ohm
Coaxial Cable

Antenna

Jack

39R0521A.indb 12

8/6/10 2:22:06 PM

Summary of Contents for LT-22AM21

























































Search results

Summary of Contents for LT-22AM21

Reviews:

Related manuals for LT-22AM21

Brands by name

Popular brands

Sansui LT-22AM21, Owner'S Manual

Search results

Summary of Contents for LT-22AM21

Reviews:

Related manuals for LT-22AM21

Brands by name

Popular brands