Sansui HDPDP5050, Owner'S Manual

Page: 11 / 56

11
1. Open the battery compartment cover.
2. Install two “AA” batteries (supplied).
HOW TO INSTALL BATTERIES
Before using the remote control, batteries must first be installed.
3. Replace the battery compartment cover.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery manufacturer's
directions.)
Use two “AA” size batteries. The batteries may last approximately
one year depending on how much the remote control is used. For
best performance, it is recommended that batteries should be
replaced on a yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different types.
HOW TO USE THE REMOTE CONTROL
You may be able to use the remote control to operate
your VCR, Cable/Satellite box and DVD along with the
Plasma TV after the batteries are installed and you have
registered the codes that operate your products.
Some buttons are used exclusively for each product and
some buttons are used in common with each product.
To operate your products correctly using this universal
remote control follow each step below.
A. For PLASMA TV
Slide the selector switch to select “TV” first.
B. For VCR
Slide the selector switch to select “VCR” first.
C. For CABLE/SATELLITE box
Slide the selector switch to select “CBL” first.
Aim remote at CABLE/SATELLITE box.
NOTES:
• Some buttons that have same functions are called different
names according to the brand and model of the product. For
example, RESET may be called “CANCEL”.
• The buttons A , B , C and D are used exclusively for each
product. You can use these buttons whenever you want.
Press other buttons to operate the features of your
Plasma TV. You can use the VOL + and – buttons, the
0-9 buttons.
Press other buttons to operate the features of your VCR.
You can use the VCR CH
▲
and
▼
buttons, the 0-9
buttons, the CH ENTER button.
Aim remote at VCR.
Press the POWER button.
Aim remote at Plasma TV.
Press other buttons to operate the features of your
CABLE/SATELLITE box. You can use the CH
▲
and
▼
buttons, the 0-9 buttons, the CH ENTER button.
Press the POWER button to turn on your CABLE/SATELLITE box.
D. For DVD
Slide the selector switch to select “DVD” first.
Aim remote at DVD.
Press other buttons to operate the features of your DVD.
You can use the DVD SKIP
6
and
7
buttons, the
TOP MENU button, the DVD MENU button, the 0-9
buttons, the CH ENTER button.
Press the POWER button to turn on DVD.
Press the POWER button to turn on VCR.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Remote control
A, B, C, D
A,B,C,D
A
D
A
B,C,D
A
A,C
B,D
A
3X81001A_En_p06-13 06.8.22, 4:09 PM 11