Sansui HDPDP5050 Owner'S Manual Download

Page: 10 / 56

Remote control

12. DISPLAY Button -

When the TV is receiving an

analog signal pressing this button will display the
current information on-screen. When the TV is
receiving a digital, pressing this button once will
display the digital information on-screen; pressing it a
second time will display the analog information on-
screen. To remove the display from the screen, press
this button again.

13. QUICK VIEW Button -

This button allows you to go

back to the previous input source selected by just
pressing the QUICK VIEW button. Press this button
again to return to the channel you were watching.

14. INPUT SELECT Button -

Press to display SOURCE

SELECTION menu.

15. CH ENTER/– Button* -

Some connected equipment

such as a Cable/Satellite box, VCR, or DVD may
require this button to input selected channels. This
button is also the “–” button used when selecting
digital channels.

16. CLOSED CAPTION Button -

Displays text captions

or full screen text on the screen for hearing impaired
viewers.

17. ENTER Button -

Use to enter or select information

for On-Screen operations.

18. VOL (VOLUME) + / –

/ CURSOR

/ Buttons -

Used to operate the menu functions of the Plasma
TV. Press the button to increase, or the button
to decrease the sound level.

19. EXIT Button -

Press to remove setup menu.

20. DVD Operation Buttons* -

Press to operate your

DVD if programmed properly using a code listed on
page 13.

1. PLASMA TV, VCR, CBL (Cable/Satellite box), DVD

POWER Button* -

Used to turn the Plasma TV,

VCR, Cable/Satellite box or DVD on or off after you
select the operating mode.

2. SLEEP Button -

To set the Plasma TV to turn off

after a preset amount of time, use the SLEEP button
on the remote control.

3. Direct Channel Selection Buttons (0-9)* -

Allows

direct access to any channel of the VCR, Cable/
Satellite box or DVD.

4. MUTE Button -

To turn off the sound, press this

button once. The Plasma TV will be silenced and the
symbol “MUTE” will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME)

–

buttons.

5. RESET Button -

Press to reset the On-Screen

picture adjustments to their factory preset positions.

6. CH (CHANNEL)/CURSOR

▲

▼

Buttons* -

Used to

operate the menu functions of the Plasma TV, and to
change the channels of a Cable/Satellite box.

7. MENU Button -

Use to display the On-Screen menu

function.

8. 16:9 Button -

Press to display PICTURE SIZE menu.

9. VCR Operation Buttons* -

Press to operate your

VCR if programmed properly using a code listed on
page 12.

10. TV, VCR, CBL (Cable/Satellite box), DVD Selector

Switch -

Slide to select the Plasma TV, VCR, Cable/

Satellite box or DVD to be operated.

11. CODE SET Button -

Used to register the 3-digit

codes to operate your VCR or Cable/Satellite box.
(See page 12 and 13).

* You can use these buttons to operate

your VCR, Cable/Satellite box or DVD
after you have programmed the re-
mote control for the code that oper-
ates your VCR, Cable/Satellite box or
DVD (see page 12 and 13).