Sansui HDLCDVD195B, Owner'S Manual

Page: 27 / 80

27
ENGLISH
Repeat playback
Title, Chapter Playback:
1
Press PLAY MODE during playback or stop
mode.
2
Press ENTER repeatedly to select “Chapter” or
“Title”.
The unit automatically starts repeat playback
after finishing the current title or chapter.
If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
•
Play Mode
Repeat : Off
3
Press PLAY MODE again to make the screen
disappear.
In stop mode, press PLAY to start Repeat
playback.
To resume normal playback, select Repeat
“Off” in step 2.
•
•
A - B Repeat Playback:
A-B repeat playback allows you to repeat material
between two selected points.
1
Press REPEAT A - B during playback.
The start point is selected.
A
2
Press REPEAT A - B again.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts
again.
3
To resume normal playback press REPEAT A - B
again.
“ Off ” appears on the screen.
NOTE:
Some discs may not work with the repeat operation.
In A-B repeat mode, subtitles near point A or B may
not appear.
During the A-B Repeat Playback the ANGLE
feature will not operate.
You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
A-B Repeat does not work with an interactive DVD,
MP3/WMA/JPEG-CD.
Marking desired scenes
The TV/DVD stores the points that you want to
watch again. You can resume playback from that
scene.
Marking the scenes:
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼ , then press
ENTER at the desired scene.
•
•
•
•
•
Marker 2
Marker 1 00 27 54
Marker 3
Up to 3 scenes can be selected.
Repeat this procedure to set the other 2
scenes.
•
•
3
Press MARKER to remove this display.
Returning to the scenes:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
Marker 2
Marker 1
Marker 3
00 27 54
01 16 25
02 08 31
3
Press ENTER .
Playback starts from the marked scene.
To cancel the mark:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
3
Press CANCEL .
Press MARKER to remove this display.
NOTE:
The marking is canceled when you eject the disc or
turn the power off.
Some subtitles recorded around the marker may fail
to appear. [DVD]
Changing soundtrack language
You can select the language when you play a
multilingual disc.
1
Press AUDIO during playback.
The current soundtrack language will appear.
1/2 Eng Dolby Digital
2
Press AUDIO repeatedly until the desired
language is selected.
The on-screen display will disappear after a few
seconds.
NOTE:
If the desired language is not heard after pressing
AUDIO several times, the language is not recorded
on the disc.
Changing soundtrack language is canceled when
you eject the disc.
The initial default language or available language
will be heard if the disc is played back again.
•
•
•
•
52C1721B.indb 27 52C1721B.indb 27 7/18/09 9:43:45 AM 7/18/09 9:43:45 AM