background image

12

To connect the LCD TV to a DVD player /Satellite receiver

If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the LCD TV is 

dependent on the model and features of each component. Check the Owner’s Manual provided with each 

component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate 

your particular assortment of components. The diagrams are intended to show component video and audio 

interconnections only. 

To connect the LCD TV to a VCR

To connect the LCD TV to a VCR with an S

-

Video cord 

If you connect a VCR with a S-Video cord to the S-VIDEO IN jack on the LCD TV, you must also connect the 

audio cords to the VIDEO/AUDIO(L/R) IN jacks. The S-Video cord only carries the video signal. The audio signal 

is separate.

NOTE:

When the S-Video cord and the video cord are connected to each jack at the same time, the S-Video cord 

takes precedence over the video cord.

Rear of the LCD TV

To Audio/Video OUT

Audio/Video cord

(not supplied)

Rear of the LCD TV

Rear of the LCD TV

To S-Video OUT

To Audio OUT

Audio cord (not supplied)

S-Video cord (not supplied)

To S-VIDEO IN

To VIDEO/AUDIO 

(

L/R

)

 IN

To S-Video OUT

To Audio OUT

Audio cord (not supplied)

S-Video cord (not supplied)

To S-VIDEO IN

To VIDEO/AUDIO 

(

L/R

)

 IN

To VIDEO/AUDIO (L/R) IN

34C1121B.indb   12

34C1121B.indb   12

8/5/08   1:25:45 PM

8/5/08   1:25:45 PM

Summary of Contents for HDLCD1908B




























Reviews: