-
18
-
This function allows to duplicate codes from a remote control to another
without pressing the "Code" button on motor
1.
Switch the original remote control (RM-A) and the duplicate one (RM-B) to
【
Setting Mode
】
（
P11
）
.
2.
Select the channel needs to be copied on RM-A.
3.
Open the battery cover on RM-A, use a thin rod to press shortly on the
【
Copy
】
button located above the battery, when the motor responds with a beep sound then the
motor is ready to be connected.
4.
Select a channel on RM-B which will connect to the motor.
5.
Press
【
Up
】
and
【
Down
】
on RM-B simultaneously, it completes receiving codes when
the motor responds with beep sound.
Use a thin rod to press shortly on the
【
Copy
】
button
：
To start "code" function on
motor, allow other remote
controls to connect.
Duplicate Remote Control
Beep
Press the
【
Up
】
and
【
Down
】
simultaneously
