Sans Digial TowerSTOR TS25CT
Sans Digital TowerSTOR TS25CT User Manual
11
2.1.1 Installing the Rubber Feet
Four (4) rubber feet can be attached to the base of the unit to provide stable stand. The
following are the steps in installing the rubber feet:
1.
Prepare the four (4) rubber feet.
2.
Remove the rubber feet by pulling it outward.
3.
Attach the rubber feet on the base of the unit. The rubber feet can also be pasted
on the unit anywhere the user prefers, but must be evenly spaced so that the unit
will stand firm and stable.
2.2 Preparing the Subsystem and Powering On
Here are the steps to prepare the RAID subsystem for use.
1.
Connect the USB cable or IEEE 1394 cable from RAID subsystem to the USB
port or IEEE 1394 port on Host/Server.
NOTE:
Only one host connection will work at a time. You cannot use both USB and IEEE
1394 ports at the same time.
2.
Connect the power adapter to the power input socket. Plug the other end of
power cord to the power source.
