Sans Digial TowerSTOR TS25CT
10
Sans Digital TowerSTOR TS25CT User Manual
Chapter 2 Getting Started
This section describes the physical locations of the hard drives supported by the
subsystem and give instructions on installing a hard drive. The subsystem supports
hot-swapping allowing you to install or replace a hard drive while the subsystem is
running.
This also discusses on how to power-on the subsystem in preparation for operation.
2.1 Installing Hard Drives
a.
Push the tray latch to release a disk tray.
b.
Then pull out the (empty) disk tray.
c. Place the hard drive in the disk tray. Make sure the holes of the disk tray align
with the holes of the hard drive.
d. Install the mounting screws on the bottom part to secure the drive in the disk
tray.
e. Slide the tray into a slot until it reaches a full stop.
f. Press the lever in until you hear the latch click into place.
