64
5.3.
For
F
reeBSD
You must have administrative level permissions to install SAS RAID software. This procedure assumes that the SAS
RAID hardware and FreeBSD are installed and operational in your system. The following installation procedure
explains how to install the SAS RAID software for FreeBSD.
1.
Insert the SAS RAID controller software CD in the CD-ROM drive.
2.
Login as root. Copy <CD-ROM>\PACKAGES\FreeBSD\http
ArcHTTP file to a local directory. The next steps are same as Linux. Please see section 5.2 For Linux.
5.4.
For Solaris 10
You must have administrative level permissions to install SAS RAID software. This procedure assumes that the SAS
RAID hardware and Solaris are installed and operational in your system. The following installation procedure
explains how to install the SAS RAID software for Solaris.
1.
Insert the SAS RAID controller software CD in the CD-ROM drive.
2.
Login as root. Copy <CD-ROM>\PACKAGES\FreeBSD\http
ArcHTTP file to a local directory. The next steps are same as Linux. Please see section 5.2 For Linux.
5.5.
For Mac OS X
The firmware embedded McRAID storage manager can configure and monitor the SAS RAID controller via ArcHTTP
proxy server. The ArcHTTP proxy server for Mac OS X has combined with the CLI and driver on the install_mraid
installer, please refer to Chapter 4.6 Driver Installation for Mac OS X.
5.6.
ArcHTTP Configuration
The ArcHTTP proxy server will automatically assign one additional port for setup its configuration. If you want to
change the “archttpsrv.conf” setting up of ArcHTTP proxy server configuration, for example: General Configuration,
Mail Configuration, and SNMP Configuration, please start Web Browser http:\\localhost: Cfg Assistant. Such as
http:\\localhost: 81. The port number for the first controller McRAID storage manager is ArcHTTP proxy server con-
figuration port number plus 1.
Summary of Contents for ES208X12HP
Page 1: ......
