www.sansdigital.com
|
info
@
sansdigital.com
|
phone 800 980 1988
|
fax 626 322 3878
Management Methods
There are three management methods to manage AccuRAID series, describe in the following:
Web GUI
AccuRAID Series support graphic user interface to manage the system. Be sure to connect LAN cable from the LAN
port of the AccuRAID unit to the local network.. The default setting of management port IP is DHCP.
To connect, type the IP address in the web browser. If you have trouble to locate the IP, please see the front LCD
display and the management IP will be displayed. Be sure to add the IP address to trusted network to avoid connecting
issues
Default setting:
Login name: admin
Default password: 0000
Console Serial Port
Use NULL modem cable to connect console port of the RAID subsystem. The console setting is baud rate: 115200, 8
bits, 1 stop bit, and no parity.
Terminal type: vt100
Login name: admin
Default password: 0000
LCD Module
All of the features within web based management GUI and console serial port can be accessed using the front LCD
display.
Default password: 0000
Controllers, Hard Drives and Front LED indicators
Host connections port LED indicators (Fibre channel and SAS ports):
LED Colors
Indicate
Green Link
FC/SAS
Blue + Blink
Access
Raid controller status LED & fault LED indicator:
LED Colors
Indicate
Status
Green + Blink
Raid Controller OK
Fault
Red
Raid Controller Fault
SAS expand port LED Indicator:
LED Colors
Indicate
Green Link
SAS
Blue + Blink
Access
Front panel LED indicator:
LED Indicator Normal Status Problem
Indication
Power On
indicator
Bright Blue
This LED does not light up
after power switched on
Fail Indicator
LED never light up LED light up as Red.
Data Access
Indicator
Blink blue during
host computer
accessing the
RAID subsystem.
LED never flickers
