www.sansdigital.com
|
info
@
sansdigital.com
|
phone 800 980 1988
|
fax 626 322 3878
Install the Slide Rails
1.
Combine Left slide rail and rear slide rail.
2.
Measure the depth of the rack enclosure, then fasten 4 of P4*8M screws into M4 Locking nuts to fix the length.
3.
Use T5*8M screws and PW14 washer to install the left slide on Front and rear Posts of Rack as Figure 1.
4.
Repeat procedure 1 ~ 3 to install the right Slide into the Rack.
Figure 1
Place the AccuRAID subsystem into the rack
1. Lift the subsystem enclosure and slide it slowly and gently along the slide rail into the rack as Figure 2.
Figure 2
2. Fasten two M5 screws through the chassis ears in the front side of the chassis to secure the AccuRAID subsystem in
the rack as Figure 3.
