1. Select
“/ Volume config / User data volume”
.
2. Click “
”.
3. Enter a UDV name, choose a VG Name and enter a size of UDV; decide the stripe high, block size,
read/write mode and set priority, then click “
“.
4. Done. A UDV has been created.
5. Do one more time to create another UDV.
Figure 3.5.6.4
(Figure 3.5.6.4: Create UDVs named “UDV-R5-1” and “UDV-R5-2”. Regarding to “VG-R5”, the
size of “UDV-R5-1” is 50GB, the size of “UDV-R5-2” is 64GB. The status of these UDVs are
online, write back, high priority with cache volume 120MB. “UDV-R5-1” is initialing about 4%.
There is no LUN attached.)
Step 3:
Attach LUN to UDV.
There are 2 methods to attach LUN to UDV.
1. In
“/ Volume config / User data volume”
, press “
”.
2. In
“/ Volume config / Logical unit”
, press “
”.
The procedures are as follows:
Figure 3.5.6.5
Advanced operation
33
