Sanremo CUBE V, Instruction Booklet

Page: 39 / 138

CUBE Transport, unpacking and components
39
TRANSPORT, UNPACKING AND COMPONENTS
4 UNPACKING AND POSITIONING
- Always check the conditions of the package:
inform the carrier if damaged.
- The elements of the package (box, cellophane,
metal staples, etc.) can cut or injure if not handled
with care or used improperly; keep away from the
reach of children or unsuitable persons.
- Keep the machine packaging carefully in case you
need to return it
ATTENTION: packaging elements
(plastic bags, cardboard, nails, etc.)
must NOT be left within the reach of
children.
Any damage, malfunction or
non-conformity must be timely
communicated, in any case within
8 days from receipt of the machine.
Otherwise the goods are deemed
accepted.
4.1 MACHINE POSITIONING
Place the machine on a level, dry, smooth, sturdy
and stable horizontal surface at a height of more
than 90 cm above the ground. Do not use or install
in locations where water jets are used. To ensure
normal operation, the unit must be installed in places
where the temperature is b 5°C and +
32°C and the humidity does not exceed 70%. If the
machine is exposed to temperatures below +0°C
proceed as follows:
make sure that the machine has been stored for 24
hours in a place where the temperature is above +
15°C before switching on.
The machine is electrically powered and for its
operation it requires:
connection to the power network;
connection to the exhaust and supply circuit (CUBE R
supplied from the mains).