JCD3007
7
No power
The vehicle’s ignition is not on
If the power supply is properly connected to the vehicle
accessory terminal, switch the ignition key to “ACC”.
The fuse is blown
Replace the fuse.
Disc cannot be loaded or
ejected
Presence of CD disc inside the player
Remove the disc in the player and insert the new one.
Inserting the disc in reverse direction
Insert the compact disc with the label facing upward.
Compact disc is extremely dirty or disc is
defective
Clean the disc or try to play a new one.
Temperature inside the vehicle is too high
Wait until the ambient temperature returns to normal.
Condensation
Leave the player off for an hour or so, then try again.
No sound
Volume is too low
Adjust volume to audible level.
Wiring is not properly connected.
Check wiring connections.
The operation keys do
not work
Control panel not properly installed
Reinstall control panel.
The built-in microcomputer is not operating
properly due to noise
Press the
RESET
button.
Sound skips
The installation angle is more than 30 degrees.
Adjust the installation angle to less than 30 degrees.
The disc is dirty or defective.
Clean the disc and try to play again or use new disc.
Cannot tune to radio
station, auto-seek does
not work
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too weak.
Select a station manually.
ERROR 1
Mechanism Error
Press the eject button to correct the problem.
If the error code does not disappear, consult your nearest
service dealer.
ERROR 2
Servo Error
Press the eject button to correct the problem.
If the error code does not disappear, consult your nearest
service dealer.
