31/31
ENGLISH
– ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH
Warning
1.For safety, please don`t change the electrical equipment. If any problem, please ask a professional
and skillful person to repair it.
2.Do not touch the covers of the heater when the heating on or off within 10 minutes.
3.Pls don't use the product, If you apt to bleed, especial ly people who suffers heart disease,
cardiovascular disease, mal ignant or with new wound. Other symptoms or patients, please use t by
doctor’s permition.
4. Be sure of power off when clean the cabin, replace parts, or remove operating faults Please turn off
the power when cleaning the cabin, replacing accessory or damage parts.
Notice
1.The ideal using time is 20-30 minutes, control system set time is 30 minutes.
2.The suitable temperature is 35~50
℃
,please adjust heater's temperature to match need.
3.Please put off the power plug from the socket after use.
4.Please make sure wires and sockets are al l connected wel l before turning on power.
5. In order to extend the l ife of the product,it must at least 30 seconds between turn on or off.
Maintenance
1. Pls use general neutral liquid detergent to clean the product curface(Included bamboo
wood,Composite board, plastic,aluminum,plated parts,spray pieces),but don`t use strong alkal ine
detergents and organic solvents(such as Alcohol, Thinner, Ammonia, Acetone etc.)
2. Never wipe gi lded or chrome-plated pieces with rough tool but soft cloth.
Troubleshooting
Problem
Reason
Remedy
No Power
1. Poor connection of power.
2. Power failure of leakage switch.
3. Fuse off.
1. Connect well the power socket.
2. Reconnect the leakage switch.
3. Replace fuse.
No Infrared
1. Up to permanent temperature,
temperature detector off.
2. Heater supply plug not connect
well.
3. Damage of infrared tube /board.
1. Temperature off and automatically
recover.
2. Connect well te plug.
3. Replace infrared tube/ board.
No Sound
1. Low volume setted.
2. Speaker supply cord is loose.
3. Damage of speaker
1.Ajdust volume.
2. Connect well the supply cord.
3. Replace speaker.
No color light
1. Turn off.
2. Multicolor lamp supply cord is
loose.
3. Damage of multicolor lamp.
1. Turn on color light.
2. Connect well the supply cord.
3.Replace the multicolor lamp.
No fan
1. Turn off or automatic.
2. Fan supply cord is loose.
3. Damage of fan.
1.Turn on the fan.
2. Connect well the supply cord.
3. Replace the fan.
Summary of Contents for D60710
Page 17: ...17 31 11 2014 Item No D60710 ...