29/31
ENGLISH ENGLISH
– ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH
Function instruction
1. System Booting
Power On/Off light indicates by flashing slowly when the electricity is on. The system is in stand-by
status. Press the Power On/Off button
to start the system and the Power On/Off indicators
constant on. All the functions including the Lampion function, heating function of carbon fiber heater
are turn on together. The dynamic screen of Temperature shows the default temperature at 40 within 5
seconds by flashing. If no any operations of the temperature adjustment, the temperature setting will
return to indicate the indoor temperature after 5 seconds. The dynamic screen of the time shows the
default time of the heating function is installed 30 minutes. The system is working to shut down all
functions and displays after press the Power On/Off button again.
2. Heating function of Carbon Fiber Heaters heater
After start-
up, press the upper “
“key to activate the back/floor heathers then press the down key
“
“to activate the front heathers. The indicator light changes to the colour “green”. The red glass
heather now works with 70%, press the two key “
“ several times to increase the power of the red
light emitter by 10 % (maximum 100 %) or if you have the 100% achieved power press the 2 key
“
“ again in order to reduce the power of the red light emitters by 10 % (minimum 70 %)
3. Radio function
Press the Radio button
to switch on the Radio when the system is booting. The Radio light turns
green. The dynamic screen shows the previous Radio frequency of last time within 50 seconds.
Meanwhile, the Radio channel searching indicator is on and broadcasting the program of the previous
radio frequency. The radio frequency is between 87.5 -108 MHz. If you press the button, the Radio
function is off, it indicate as “-----“.
4. Radio Frequency adjustment
Press the Turn button
or
to adjust the Radio frequency. The frequency will be up and down by
0.1 MHZ when pressing the Turn button. Keep on long press the Turn button more than one second,
the system can search the frequency automatically, and it will stop when it received a well signal.
5. External CD & MP3 function
Access the signal of CD&MP3 “
” when the system is on working status. Press the External
CD&MP3 function button
, the dynamic screen will show character “CD”, Press the button External
CD&
MP3 function button again, this function will be closed and the dynamic screen indicate the
Character “----”.
Summary of Contents for D60710
Page 17: ...17 31 11 2014 Item No D60710 ...
