18/52
4.1.5 Beeper function for correct transport angle
By default the beeper function is active. While the beeper function is active an
acoustic signal is given as soon as the stairclimber is no longer in the ideal
stairclimbing angle.
To deactivate press the main switch (1) for approx. 30 seconds. A short acoustic
beep signal indicates that the function is now off. Repeat the procedure to reactivate
this function.
WARNING: Deactivating this function eliminates audio notification of incorrect angle
and could be a hazard! Deactivate at your own risk.
4.2 UP/DOWN switch left and right on handle
The
UP/DOWN switch
is labelled with a
neutral position (0) and two triangles
pointing away from the operator (
forwards
)
and towards the operator (
backwards
).
Down:
press triangle pointing
forward holding
button down for one complete cycle.
Up:
press triangle pointing
backward holding
button for one complete cycle.
UP
DOWN
