Sanlien Palert, Hardware System Installation Instruction

Page: 2 / 13

Install PALERT Hardware
Basic Environment Required:
1. Power: 110 v indoor power
2. Ethernet : RJ45 port with IP address attached
3. Sturdy Building (ex: Wall, Beam, column)
Installation Items Required:
1. PALERT
2. DC24V Adaptor
3. RJ45 Ethernet Cable
(There jumper cable network can connect PC
with PALERT directly, or you must go through HUB)
4. Cross-Head and SHCS Screw Driver, Automation
Screw Driver
5. Wall Frame and PALERT Back Board.
6. SHCS screws, Common Screws and
Plastic(or metal) Anchor Screws, M4 screws.
7.Hammer, Bubble level meter, Pen.
(tools Photo see as next 3 pages)