Beater
2-4
3-10
660g flour and
840g water
2 speed run for20s, the
4 speed run for more
than 2min40s
Whisk
6
3-10
(Minimum)
Open 5 or 6 speed to
run 3min above.
Troubleshooting
NO.
Troubles
Solution
1
The machine doesn't work
·Check if the plug is in good contact with the socket.
·Check if the rise button spring back in place.
·Check if the machine works continuously more than
6-10 minutes, and wait until the motor cool down.
2
Noise in the mixing bowl when
working (the accessory scraped the
bowl)
·Check if the mixing bowl is properly installed.
·Check if the accessory installed properly on
machine.
3
The pot cover doesn
’t fit the mixing
bowl properly
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl installed properly on
machine and locked correctly.
4
The machine doesn’t work on certain
speed
·Check if the mark on speed knob correspond to the
speed silkscreen on housing.
·Rotate speed knob to 0 ,and re-check if the machine
works .
5
Movements when the machine
working
·Check if the anti-slip feet fall off.
·Check if the machine is placed on a smooth and flat
tabletop.
6
The rise button didn
’t spring back in
place after installing the mixing bowl
and pot cover
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl is properly installed.
Cleaning
Before cleaning remove the mains lead from the socket.
Never immerse the housing with motor in water!
Do not use any sharp or abrasive detergents.
Motor Housing
Only a damp rinsing cloth should be used to clean the outside of the housing.
