Sanlida HERO 10 TARGET COMPOUND BOW KIT, Owner'S Manual, Page: 16 / 24

2.Stabilizer quick connection
Required accessories: No.12, No.16, No.19 ,No.20, No.22
Take out the screws from No. 19 and No. 12 boxes and screw them on the weight hole at the front end of
the bow handle.
Take out the extender, and then take out the cylindrical nut in the No. 12 box, screw it to the threaded
end of the extender, without screwing it to the end, then insert the cylindrical nut into the quick release
installed in the previous step, and tighten the extender.
Screw the cylindrical nut of No.19 to the threaded end of No.16 without tightening it, and then screw
No.20 to the other end of 16. Set aside for later use.
13