Sanlida HERO 10 TARGET COMPOUND BOW KIT, Owner'S Manual, Page: 12 / 24

BOW PRESS INSTRUCTION
·
It is necessary to make sure the initial setup of the Axle -to -Axle , brace height, cam after the entire
bow string is installed and adjusted. This will ensure the performance of the bow can be fully exerted.
·
The cam synchronization means the bow string hit the draw stop peg on the upper and the stop peg
of lower cams simultaneously to complete the stop motion of the cam while full draw of the bow.
·
When the upper cam and lower cam do not hit on the bowstring at the same time, it means that the
upper cam and lower cam do not rotate synchronously. This is cams non-synchronization.
·
The bow may not be synchronized after attaching accessories. If bare bow installed with different
accessories, it may also cause slight cams non-synchronization. So we recommend that a bow is only
used by one person.
·
When the upper cam and lower cam are out of synchronization, the length of the bow string needs to
be adjusted (see the following instruction for the bow adjustment method ). Now , it is time for you to
use the bow press. Here is a introduction of how to use the bow press as following:
·
It
’
s very important to use bow press correctly.
·
Choose the correct bow press to make sure that the string and cables can be taken out easily when
compressing the bow.
·
The limb is not allowed to be pressed against the supporting pole.
·
For a split bow limb, the bifurcations of the bow press should seize the end of the limb, which will help
to prevent the slipping out of the bow while compressing the limbs. The bifurcations of the bow press
also should have the proper length to allow the rotation of the cam when compressing the bow.
·
The bow limb must be accurately leaned on the bifurcation of the bow press without twist on the limb
for avoiding the falling off of the bow from the bow press and cause injury.
·
Do not excessively bend the bow . To avoid abnormal bow bending, resulting in damage or broken
bows and other serious accidents.
·
Do not attempt to use the bow press without proper training.
09
A.Caution and Warnings
This products are designed with great care for safety. However, due to the nature of this product, certain
parts contain sharp edges. Please take care when handing this product.
To ensure using this product to best effect, please confirm the following points before and after shooting:
INSTRUCTIONS OF 10
SIGHT AND SCOPE