Use
r’s Manual Sanli LS42 - LSP42 - LSP46-LBP46 / 11
3.14 Adjusting the cutting height
For best results, always adjust the cutting height of your mower to suit the
mowing conditions and do not try to remove too much grass in one pass.
Adjustment of the cutting height for models LS42, LSP42 and LSP46 is made
centrally.
CAUTION: Never adjust the cutting height when the engine is running. Always
remove the spark plug cap before making any adjustments.
Take hold of the height of cut
adjustment lever positioned on the
mower’s right-hand rear wheel.
Move the lever outwards to release it
from its locating notch (fig.8).
Move the lever towards the front of
the machine to increase the cutting
height and towards the rear to reduce
the cutting height.
Return the lever to the locating notch to set the desired cutting height.
Make sure the handle fits snugly and securely into its serrated holder.
Obstructions such as grass clippings should not hinder his movement or
positioning.
3.2 Using the mower
Before starting and using the mower, check for the presence and operation of
safety devices. Also, check the condition of the blade and its securing bolt. If
necessary, replace or repair defective items. Use only genuine SANLI parts or
parts that have been approved by SANLI UK.
If possible, mow only when the grass is dry. If the grass is wet or excessively
long, perform two cutting passes. Make the first pass at maximum cutting
height to avoid overloading the mower. The second pass should be made at
the required finished height. If grass builds up beneath the mower’s chassis,
stop the engine and remove the spark plug’s cap before cleaning the
underside of the cutter deck.
