SANLI GTS26, Operator'S Manual, Page: 10 / 30

10 / Operator’s Manual Sanli GTS26
3. Usage Guidelines
Modifications not authorised by SANLI can render the tool
dangerous and may lead to serious injuries during use. SANLI UK
will not accept any liability for any type of misuse or for any use
which does not conform to these instructions or to current
regulations.
WARNING: All cleaning, transport and maintenance operations
must be carried out with the motor off and the Start/Stop switch in
the STOP position.
3.1 Preparation of the petrol brush cutter
WARNING: Do not use the brush cutter unless it is fully assembled!
3.
11 Setting up the petrol brush cutter
• Unpack all the parts carefully and make sure that there are no
parts missing. Make sure that all parts function properly.
• Fix the lower handle to the tube by positioning it under the
main handle according to your height, and fix it in place by
screwing the four fixing screws (fig. 1).
WARNING: Check that the lower handle is installed properly, with
the safety arm facing your legs. For a right-handed person, the
safety arm will be installed toward the left; for a left-handed person,
the safety arm will be towards the right.
fixing screws
Installing the nylon spool