Sankakogyo SIH-BH327BTW, Instruction Manual

Page: 6 / 36

6
Before Use
■ Function to prevent heating when no pan/pot is set (indication LED: )
When no pan/pot is placed or an unusable pan/pot is used, heating
is disabled.
※ The supplying power will stop after 10 minutes.After
that, the power will be turned off automatically after
10 seconds.
■ Function to prevent failure to turn off
If no operation has been performed after heating operation, the
power supply will be turned off after a certain period has
elapsed.
※ The period until stopping differs depending on the heating
power. (Refer to the list on the right.)
※ When the booster is used, the heating power switches to “9”
and then the heating automatically stops.
■ Function to automatically stop once an abnormality in operation panel is
detected (indication LED:
)
An error sound may be generated and the power supply may be turned off if the operation panel
is splashed with liquid due to boiling over or the like, an object is placed on the operation
panel, or two adjacent keys are pressed at the same time.
■ Function to prevent overheating (indication LED: / )
When the temperature inside the heater becomes abnormally high as the air inlet/outlet port is
covered or for some other reason, the heating power automatically decreases or the power supply
stops. If the temperature lowers to a normal temperature, the heating power and the power supply
will be restored.
■ Function to prevent excessive temperature rise(indication LED: / )
If the temperature of the pan/pot bottom surface becomes abnormally high due to heating of an
empty pan/pot, the power supply to the cooker will be automatically turned off.
* When the heating power is low or depending on the pan/pot type, the power supply may not be
automatically turned off.
※ This function may be triggered when high-temperature cooking such as frying is performed.
■ High temperature caution indication (indication LED: )
While the top plate is hot with the power supply turned off, the indication LED “Hot” lights
to notify that condition.
※ This indication is not displayed during cooking.
■ Function to automatically turn off Power switch
If no operation has been made for approx. 10 seconds since turning on of the power supply, the
power supply will be automatically turned off.
※
If the power supply has been turned off due to triggering of any of the above safety
functions, turn off the power supply once and then perform the intended operation
again.For safety functions, also refer to the relevant items on pages 13 to 14.
Safety functions