1. AC INPUT
AC power input
2. POWER SWITCH
Switch power on/off, I is power on, 0 is power off.
3. CONTROL
Line control input for external controller.
4. FUSE HOLDER
5. SUBWOOFER OUT
On
：
switch of bass output on/off, press this button ON then there will be not bass signal output from
MIX OUT terminal.
PROPORTIONAL: To adjust attenuation proportion of bass, used to adjust attenuation proportion of bass
when there is microphone input.
FREQ: to adjust the frequency of bass, frequency division range is 35Hz-250Hz.
VOLUME: to adjust the volume output of bass.
6. CENTER OUT
Output terminal of the center channel.
Volume: to adjust the level of center output volume.
Balance: to adjust the music and microphone mixing level output
7. REAR OUT
Volume: to adjust the level of rear output channel volume.
8. MIX OUT
Main channel output.
9. MUSIC INPUT
There are two sets of RCA input jack for VOD and BGM input.
10. MIC INPUT JACKS (A,B)
Jacks for microphone input
11. VIDEO IN
There are two sets of input jack (VOD, BGM) for video input.
12. VIDEO OUT
Video output for connecting TV.
REAR PANNEL DESCRIPTION
1. LCD screen
The screen to show the setting and information.
2. REMOTE SENSOR
Please always face the remote sensor while using remote
controller.
4. ECHO MODE
DOWN: Used the previous Echo mode.
KTV/USER: used the KTV fixed echo modes (8 kinds of none- programmable mode) or use USER to edit
echo modes (8 kinds of programmable mode).
UP: Use the next Echo mode.
5. BBE BUTTON
Press this button to on or off BBE. Light on is ON BBE, light off is OFF BBE.
6. INPUT:
audio input.
VOD: select to VOD audio input.
BGM: select to BGM audio input.
AUTO: select to VOD audio or BGM audio input automatically.
7. FBX
Press this button to on or off FBX(Feedback eliminator) . Light on is ON FBX, light off is OFF FBX.
8. MENU
Press this button to get into the menu edition mode.
Press
⑧
MENU then rotate
③
SETUP/ENTER to left or right to change the setting ,push to enter the sub-menu.
Model No. of the player will be displayed first. once power on, music volume, music input, mic volume and
echo mode will be displayed after system self-checking. Please follow the below instructions if you want to
change the settings:
MENU SETUP/ENTER
Press
⑧
MENU A (Volume setup)
A1. Defaulted music volume setup.
A2. Max. music volume setup.
A3. Defaulted microphone volume setup.
A4. Max. microphone volume setup.
Press
⑧
again
MENU B (Echo setup)
B1. Echo volume adjustment.
B2. Left channel delay adjustment.
B3. Right channel delay adjustment.
B4. Repeat times adjustment.
B5. Effects mix echo adjustment.
Press
⑧
again
MENU C (Effects setup)
C1. To adjust the strength of effect
C2. Pre-delay adjustment, to adjust the first interval time of effect and vocal
C3. To adjust the wide of effect.
C4. To adjust the deep of effect.
C5. To adjust attenuation of effect.
Press
⑧
again
MENU D (Setting of lock)
D1. Switch of Lock and unlock..
If Menu Lock is ON then you need to input passwords if you want to change the
setting next time.
Passwords Input buttons: Press “UP” twice then press “FBX” twice.
Press
⑧
to exit menu , system will save all setting data automatically.
DISPLAY SCREEN FUNCTION DESCRIPTION
5
6
3. SETUP/ ENTER
Function key: Press to confirm to enter in the next functions.
Turn left or right to adjust the gain (-70dB to +10dB) or state
(ON/ OFF).
Press
⑧
MENU to make indicator lighting first before operation.
SE-6000
