FEATURES
BBE BOOST to control gain of bass for BBE effect with BBE ON/OFF
Build-in 24-bit high-speed DSP digital chip with 48KHz sampling rate
Build-in real-time feedback eliminator processor to filter out howling feedback noise from the speakers
automatically
Supports up to 16 internal effects including 8 fixed effects and 8 programable effects
DSP Echo & Vocal Reverb with Level control
DSP Vocal Echo with Level, Repeat and Delay controls
5 microphone channels(3 front+2 rear) with individual Master volume control and LF,MLF,MHF,HF filters
Assignable Music channel with volume, Balance, BBE BOOST control & LF,MF, HF filter
4-Band Equalizer for best fidelity and precision tuning for music control
6-Band Equalizer for best fidelity and precision tuning for microphone control
User Lock-Down mode to prevent most user from changing any setting
2 switchable stereo A/V channel input and 1 A/V output
Balance subwoofer output with Proportion Volume and Frequency controls
Balance center output with assignable Volume & Balance Controls
Balance rear output with Volume control
Balanced L/R XLR Master output & Unbalanced L/R RCA Master output
Supports external controller
Full functions LCD display for setup menu
19" rack mountable
*Feedback Eliminator-
SE-6000's real-time feedback eliminator processor was designed to provide state-
of-the-art feedback elimination processing, while maintaining a simple control interface. You just select one
of the 3 room sizes and it will automatically filter out howling feedback noise from the speakers. This is a
necessary function for any venue that is looking for a professional sound environment or any KJ who are
looking to prolong your speakers' life.
*Digital Effect Processor-
The SE-6000 has a powerful built-in Reverb and Echo Effects that can dramatically
increase the quality of your performance. A “reverb” is created when a sound is produced in an enclosed
space causing a large number of echoes to build up and the slowly decay. Reverb is most noticeable when
the sound source stops but the reflections continue, decreasing in amplitude, until they can no longer be
heard. The SE-6000 enables you to adjust the reverb time, reverb level, echo repeat and echo delay to
optimize your sound effects.
*13-Band Music and 22-
Band Microphone Equalizer (EQ)- The SE-6000 has two independent 13 band
equalizers for the music and microphone volume. Using a powerful EQ, it can compensate for your music
or singer's shortcomings or when you would like to add more treble or bass to your performance. For music,
the 13 band frequencies are at 80Hz, 800Hz, 900Hz, 1kHz 1.2kHz,1.6 kHz,3.2 kHz,4.6 kHz,5.6 kHz,6.8 kHz,
7.2 kHz,8 kHz and 12 kHz. For the microphone, the frequency bands are at 35Hz-1kHz(10-Band in MLF),
500Hz-15 kHz(10-Band in MHF), 80Hz and 12kHz. You can fine tune each frequency to your desired level.
DESCRIPTIONS
：
*Microphone Noise Gate-
This powerful auto-mute function enables your mixer to automatically turn off the
microphone when it is not in-use. The powerful noise gate function allows a microphone signal to pass through
only when it is above the preset threshold value from 1 to 40. The mixer utilizes and advanced fading technique
to cut in and out of sound so you will not hear your microphone abruptly cut off once it has fallen below the
threshold or hear a loud click when the noise gate re-opens form mute.
*5 Microphone Inputs with 2 XLR Input Connectors-
The SE-6000 includes 3 microphone inputs in the front
and 2 balanced audio connectors (XLR) for high quality microphone signal inputs form the rear. This XLR
connector allows for the use of long cables while reducing susceptibility to external noise. You can ensure
to transmit the upmost vocal signal to your SE-6000 Mixer using the XLR inputs. The rear inputs also enable
you to connect to most wireless microphone units while reducing the messy cables going from the front.
*Multiple-Channel Surround Sound Configuration-
The SE-6000 has additional audio signal outputs for
center speaker (C)
，
sub-woofer (S)
，
and 2 rear speakers (SR). You can configure the mixer using one of
the many types of settings from 2.0 (L+R), 3.0(L+C+R), 2.1(L+R+S), 3.1 (L+C+R+S) AND 5.1(L+C+R+SR+
SL+S). Using one of the many surround sound configurations will help you create the enveloping effect inside
of a concert hall.
1
2
SE-6000
