19
Always store the thermometer with the cap on in order to protect the sensor.
The device must not be stored or used at too high or low a temperature or humidity (see technical specifi cations), in sun-
light, in association with an electrical current or in dusty locations. Otherwise, inaccuracies can occur.
If prolonged storage is intended, you should remove the battery.
The device must be tested for accuracy (calibrated) after 2 years. Please send the complete device to the dealer’s or
service address.
Please dispose of the device in accordance with the directive 2002/96/EG – WEEE (Waste Electrical and Electronic
Equipment). If you have any queries, please refer to the local authorities responsible for waste disposal.
9. Technical data
Note:
When the device is used outside the specifi cations, perfect functioning cannot be guaranteed.
We reserve the right to make technical changes to improve and develop the product.
Model
SFT 22
Measurement range
34 °C – 43 °C (93.2 °F – 109.4 °F)
Laboratory measurement
precision
±0.2 °C (±0.4 °F) between 35.5 °C – 42 °C (95.9 °F – 107.6 °F)
±0.3 °C (±0.5 °F) < 35.5 °C > 42 °C (< 95.9 °F > 107.6 °F)
Clinical repeat precision
0.31 °C (children, 1 to 5 years), 0.28 °C (adults)
Measurement duration
1 to 2 seconds
Interval between 2 measurements
At least 10 seconds
Measurement units
°Celsius (°C) or °Fahrenheit (°F)
Ambient operating conditions
16 °C to 35 °C (60.8 °F – 95 °F) with a relative humidity of up to 85 % (non-condensing)
Storage conditions
-25 °C to 55 °C (-13 °F – 131 °F) with a relative humidity of up to 85 % (noncondensing)
Summary of Contents for SFT 22
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ...52 753 127 0608 Irrtum und Änderungen vorbehalten ...
