Sanitas SBC 22, Instructions For Use Manual

Page: 28 / 126

Information on the display:
The corresponding drawings are shown on page 3.
1
Systolic pressure
8 Risk indicator
2
Diastolic pressure
9
Memory space number/
memory display for
average value (
AA
),
morning (
AM AM
),
evening (
PM PM
)
3
Calculated pulse rate
4
Cardiac arrhythmia
symbol
5 Pulse symbol 10
Battery replacement
symbol
6
Release air
7 User memory / 11
Time and date
6. INITIAL USE
Inserting the batteries
• Remove the battery compartment lid on the left side of
the device
A
.
• Insert two 1.5 V AAA micro (alkaline type LR03) batteries.
Make sure that the batteries are inserted the correct way
round in accordance with the markings
A
. Do not use
rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery replacement symbol is displayed, you can
no longer perform any measurements and must replace all
batteries.
Adjusting the settings
You must make sure that the device has the correct settings
before use in order to be able to make full use of all functions.
Only by doing so can your measurements with associated
date and time be saved and accessed later by you.
There are two different ways to access the menu from
which you can adjust the settings:
• Before initial use and after each time you replace the
battery:
When inserting batteries into the device, you will be taken
to the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off press and hold the START/
STOP button for approx. 5 seconds.
In this menu you can adjust the following settings in succes-
sion:
Hour format Date Time
28