background image

PERIODIC MAINTENANCE 

(Continued)

8

Brush Roll

The brush roll turns as it sweeps and combs the carpet nap. 

Remove hair and threads from the brush roll so it continues 

brushing the carpet. To maintain the most effi cient cleaning, 

the bristles must touch the carpet. To test the bristle length, 

hold a ruler against the underneath side of the cleaner. If the 

bristles no longer touch the ruler, replace the brush roll.

3.  Lift left end of brush roll.
4.  Remove and discard old belt.

Brush

Roll

Belt

Motor

Shaft

4

Brush Roll Belt

The brush roll belt turns the brush roll to agitate, sweep, and 

comb the carpet nap. Check the belt regularly to be sure it is 

in good condition. Replace the belt if it stretches, cracks or 

loses tension. Cut away any hair or threads wound around 

the brush roll or the belt pulley because the buildup could 

cause the belt to rotate unevenly.

How To Replace Brush Roll Belt

NOTE:  Turn off the switch and unplug the electrical 

cord before replacing belt. Belt pulleys can 

become hot during normal use. To prevent 

injury, avoid touching the motor shaft when 

changing the belt.

1

2

2

1.  Lower handle to fl oor to change belt.
2.  Remove three screws indicated by screwdrivers in above 

illustration. Lift hood to remove.

NOTE:  The carpet height adjustment has to be in 

the lowest or highest position to remove 

or reinstall the hood.

Use  GENUINE  EUREKA  replacement  belt,  Style  U, 

54312B.

IMPORTANT

9.

  Rotate brush roll by hand two full rotations 

to properly position belt.

  Rotate brush roll by hand two full rotations 

  Rotate brush roll by hand two full rotations 

10. Place hood back on cleaner. Make sure hood front is 

behind furniture guard. Replace three screws.

11.  Tighten screws.

9

  5. Place new belt around motor shaft.

  6. Place belt around brush roll pulley.
  7. Align left brush roll end cap with base. Push end cap 

securely into place.

  8. Push right end cap into base until it snaps into place.

6

7

5

8

Summary of Contents for System_Pro SP5816











Reviews: