15
EN
ENGLISH
Main flush
trigger
Stop flushing
for 3 minutes
Send saved data
to other units
Data recording
Start button and
operating button
Setting
Settings via the bidirectional maintenance and service remote control DO-5.1 S
Parameter
Default setting
Setting ranges
Function
Short
range
15
(~ 5 cm)
11 - 22
(~ 3 - 9 cm)
Range for contactless manual triggering of partial and
full flush
0.5 m
range
15
(~ 50 cm)
12 - 48
(~ 40 cm -74 cm)
Range for detecting automatic flushing. The person
must remain within this range for at least 7 sec.
Time can be changed under “timed scan”.
0.8 m
range
15
(~ 80 cm)
2 - 38
(~ 40 cm - 150 cm)
Range for triggering an automatic full flush. If the
person remains within the 0.5 m detection range for
7 sec. and then leaves the 0.8 m range, the toilet will
flush automatically after 2 sec.
If a person remains within this range for longer than
2 min. and is not detected by the 0.5 m range, the flush
button goes out and no automatic flushing takes place.
Welcome
range
15
(~ 140 cm)
- 18 to 18
(~ 40 cm - 150 cm) Range for presence detection
Light mode
Welcome
Welcome
Light
ON
Light
OFF
Three different settings are possible.
Welcome
Flush panel is switched on and
off via sensor
- Light
ON
, flush panel is permanently lit
- Light
OFF
, flush panel is only lit during manual and
automatic triggering of the flushing function
Time lit
2 sec.
Time the flush panel is lit after use
Colour
Blue
Red / green / blue /
green-yellow /
magenta / azure /
cold white
Light colour of the flush panel
Brightness
High
Low / medium / high
Brightness of the flush panel light
Auto flushing
On
OFF / ON
Automatic flushing if no button is selected after use.
Timed scan
7 sec.
1 - 83 sec.
The automatic flushing function is only activated if the
user is within the 0.5 m within the set time window.
Intermittent
flushing
Off
Off
/ 1 / 3 / 6 / 12 /
24 / 48 / 72 / 96 /
108 hours
A full flush is triggered automatically after the last use
in the set time.
Stop time
3 min.
1 - 10 min.
The stop time for deactivation of the flush panel for
cleaning and maintenance work can be changed.