SaniSeat SS-101, Installation & Service Manual

Page: 19 / 27

Three Easy Steps to a Clean Sani Seat
To keep your Sani Seat running at optimal performance we recommended
using Clorox ® Clean Up :
Recommended Cleaning Procedures:
The best time to clean a
Sani Seat is while changing the roll of Sani Wrap .
This should be the only time that all the Sani Wrap is removed from the seat.
Once the
Sani Seat is clear of any Sani Wrap follow our three steps to a clean
seat.
1. Spray Clorox ® Clean Up over all infected areas, making sure not to forget
about the seat ring.
2. Let stand for a couple seconds before wiping clean.
3
. Before any Sani Wrap is put back on the Sani Seat , make sure the seat ring
is completely dry. Any moisture on the seat ring will cause drag and added
strain to the motor.
To create a slick and efficient surface for the
Sani Wrap to slide along the seat
ring, spray Food Grade Silicone by CRC to either side of the ring before
spooling a new roll of Sani Wrap.
You can order a can of Food
Grade Silicone by CRC from us along with
your next Sani Wrap order, or from your local Grainger Supply.
Page 13