Sanipex BAGNO DESIGN BDM-BIS-451L Series, Installation Manual

Page: 5 / 8

4 5
6
5
The concealed base water connections
can now tested for leaks before
removing the two plugs (5) turn water supply
off before moving onto to next step.
3
2
Install the plate (2) on the lower part of
the pillar and fix the flange (3) using the
screws provided and slide down the plate until it
reaches the floor.
4
5
Place the mixer over the concealed base.
Be sure that both pipes (4) are correcly
placed in the base; slide down the plate until it
reaches the floor, fix the screws (5).
Once the water supply is on, the connections
should be tested for leaks before the floor
finishing is completed .
Installation Completed.