IMPORTANT PLEASE READ
All products manufactured and supplied by AQUAECO are fit for purpose as long as they
are Installed, used correctly, cleaned and receive regular maintenance in accordance with
these instructions ...
Remove all packaging and check the product for damage or missing parts before commencing with
the installation.
Any alterations made to this product and its components may infringe product certification, infringe
water regulations and invalidate the guarantee. The Installation must comply with all local/national
water supply authority regulations/bylaws and building and plumbing regulations, therefore we
strongly recommend that your product be installed by a reputable qualified trade's person.
PRODUCT LIFECYCLE
"The product LiveCycle/e is the collective stages that a product goes through from
its
conception
and design through to its ultimate disposal."
DISPOSAL GUIDANCE
The best way to ensure your Product has a long life is to follow the Care and Maintenance guides set
by the Manufacture after purchase. This document can be found at
www.sanipexgroup.com.
The life cycle of the product is
not
in correlation to the product Guarantee; the standards the
products are manufactured or certified to (e.g. CE & WRAS) can exceed past the Guarantee
duration. After the life cycle of the product is deemed complete by the end-user please follow the
below to dispose of the items correctly ...
CLEANING CARE GUIDE
Only use a mild soap and water for cleaning.
Rinse with water to remove the mild soap solution.
We recommend the product is dried using a soft cloth after
every use.
Never
use any abrasive or strong cleaning products containing,
bleaches, acids (hydrochloric, formic, phosphorus, chlorine or
acetic), strong detergents, limescale remover, alcohol or dyes etc.
Never
use abrasive cleaning pads, wire wool or microfibre cloths.
Never
use cleaning equipment that may have been pre-used and
contaminated with the above substances.
Never
apply the cleaning product directly onto the finished
surface.
��
��
��
