4
5
1.
Purpose: Flush the impurities and silt in the pipe in case of the blocking.
2.
Open the protective plastic sheet and protective cover Turn on the tap and
o
pen up the supply valve rod to flush the pipe. Close the spool and test the
pressure resistance and tightness to make sure there no leakage.
3.
Blocked all outlet of pipes with plastic plugs(1/2) and turn on the tap.
Check
whether the connection port of the upper of the outlet pipe are tight
and
the status of pipeline pressure. Make sure there is no leak-age.
4.
After the test of tightness, revet the protective plastic sheet and protective
cover.
Test of Water and Tightness
Summary of Contents for AQUAECO AQM-ZEP-305 Series
Page 2: ......
Page 4: ...3 1 2 OFF ON HOT COLD HOT COLD...
Page 7: ...Note...
Page 8: ...INM ZEP 305 XX 07 21 www sanipexgroup com AQUAECO WASHROOM AND PLUMBING SOLUTIONS...
