Installation
1. Refer to step:5, remove
mounting plate from the machine.
Attach the mounting plate to the
wall and draw the positions of
three mounting holes with pencil.
2. Use a drill to bore three holes ($6)
according to the marks, put
expansion screw head into the
corresponding holes.
3. Screws will be matched with
plastic nail heads in the wall, lix
them together with mounting
plate.
4. Align the upper slot of the machine with the
mounting plate clip, then make the machine fit with
the mounting plate, and then slide the machine
downward to make the upper and lower clips all
snap in.
Upper Slot
Upper Clip
Lower Slot
Lower Clip
Anti Theft Screw
Anti Removal Screw
Battery Installing and Replacement
5.Screw in the anti-theft screw, then install the
battery box and screw in the anti-removal screw.
3. Put in or replace all standard
batteries {(DC 9V/AA batteries
(6 Pcs)}. Put it back
and
tighten the screws.
2
. Unscrew the screw and remove
the battery box
.
2
.
Keep the body straight up when
the LED light is flashing.
Indicator
Battery box
Screw
Drill
Pencil
Expansion Screw
