7
Operating Instructions
1. Fill the Portable Foot Bath with water, at the desired temperature, 1 in (3 cm) above the jets.
2. Move the unit to the place where it will be used and be sure that it is on a level, solid floor. Note: The front two
casters have locking mechanisms to prevent the unit from moving during use. Be sure the locking mechanisms are
disengaged before attempting to move the unit. A handle is built into the top of the unit for easy maneuverability.
Before moving the unit filled with water, place the two removable lids on the tank to prevent water from splashing
onto the floor.
3. Verify that the unit’s electrical cord is connected to a GFCI protected electrical outlet
.
4. To start or stop this appliance turn the dial switch to the ON or OFF position.
5. Bath additives , including oil based products , can be used in a SANIJET Pipeless™ Pedicure Bath, since their residue
can be easily cleaned.
CAUTION: Use only low foaming additives , and do not use products that contain sand or silicates .
6. You should always be in a seated position when putting your feet in or removing them from the pedicure bath.
WARNING: NEVER STAND IN THE PEDICURE BATH BASIN.
7. During use of the foot bath the front lid can be used as a foot rest as well as assist in maintaining water temperature
and reduce splashing.
Quarter-turn Counter Clockwise
