Installing the Rear Mount Bracket Kit
A 19" rear mount bracket kit comes standard with each system and allows the back corners of the IMG 2020 to be secured to the rear rack posts.
The sliding brackets accommodate racks of varying depths up to 30 inches. To order a spare rear mounting bracket, the model number for this kit
is BDN-RCK-1000. The following illustration shows the rear mount bracket kit and the IMG 2020.
Complete the following steps to install the rear mount bracket kit:
Install the fixed brackets to the IMG 2020 using 6-32 flat head screws.
Tighten the screws.
Place the sliding brackets onto the fixed brackets and install the 6-32 pan head screws loosely to permit movement.
Slide the brackets until the flanges touch the rear rack posts and tighten the screws.
Fasten the sliding brackets to the rear rack posts. These screws are not included with the kit.
