Sangean WR-22WL, Instructions Manual

Page: 13 / 41

2
Manual tuning – FM / AM
. Press the On/Off button to switch on your clock radio.
2. Press the Source button repeatedly to select the desired wave
band.
3. Rotate the Tuning control rotary to tune to a station. The frequency
will change in steps of 50kHz/00 kHz in FM or 9 kHz/0 kHz in AM.
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Adjust the Volume buttons to the desired settings.
6. To switch off your clock radio press the On/Off button.
Setting up the tuning step increment
. Press and hold the Info/menu button to enter the menu setting
when the radio source is in AM/FM mode.
2. Rotate the Tuning control rotary button until FM xxK or AM xxkHz
shown on the display, and press the Tuning control rotary to enter
the step increment setting.
3. Rotate the Tuning control rotary button to select 50kHz/00kHz
for FM radio, and 9kHz/0kHz for AM radio. Then press the
Tuning control rotary to confirm the setting.