Sangean WFT-1, User Manual

Page: 17 / 141

16
GB
Setting alarms
(The direction of Alarm menu is
Main menu > System setup > Time setup >Alarms)
The radio must have the clock / date set to use the alarm functionality.
1. The alarms menu can be accessed in two ways:
i. Press the TIMER button on the unit or the remote control.
Then rotate the TUNING knob until you see Alarm 1 and Alarm 2.
ii. As a submenu off the Time menu
(Main menu > System setup > Time setup > Alarms)
a. Press the BACK button until you see the “Main menu”.
Then press the TUNING knob.
b. Rotate the TUNING knob until the “System setup” is pointed,
then press the TUNING knob.
c. Rotate the TUNING knob until the “Time setup” is pointed,
then press the TUNING knob.
d. Rotate the TUNING knob until the “Alarms” is pointed,
then press the TUNING knob.
2. When you get into the Alarms menu, the display shows Alarm1 and
Alarm 2. There are 2 alarms for setting up. Rotate the TUNING knob
to select Alarm 1 or Alarm 2, then press the TUNING knob.
3. Set up the alarm time:
a. When the “TIME” is pointed, press the TUNING knob.
Then rotate the TUNING knob to set the hour digit.
b. Press the TUNING knob and rotate it to set the minutes.
Then press the TUNING knob.
4. Turn on the alarm:
a. Rotate the TUNING knob to let the “OFF” is pointed.
b. Press the TUNING knob to let it showing “ON”.