71
Setting the alarm clock - cont.
11
10,11
Alarm
Saved
Alarm 1 volume
Enable:Once
Time: 07:30
Mode: DAB
Preset: Last listened
Volume:20
Alarm 1
0.
.
Rotate the
Tuning Control Rotary
until the 'Volume:' option is highlighted on the display and
press the
Tuning Control Rotary
if you wish to change it. The radio uses the saved volume
setting for each alarm when it sounds. Set the required volume using the
Tuning Control
Rotary
to confirm the setting.
In order to store the alarm settings rotate the
Tuning Control Rotary
until 'Save' is
highlighted. Press the
Tuning Control Rotary
to store the alarm settings. Your radio will
show 'Alarm saved' and will then go back to the list of alarms with the new alarm setting
shown in the display. If you decide not to save the settings, press the
Back
button. The
display will show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning Control
Rotary to choose 'NO' and then press the
Tuning Control Rotary
. 'Alarm not saved' will
show on the display. Active alarms are shown using small alarm indicators at the bottom of
the playing displays and on the clock display when in standby.
Note:
If you make a mistake at any point while setting the alarms, use the Back button to go back
to the previous screen.
