Sangean PR-D14USB, User Manual

Page: 19 / 23

8
GB
Playback MP3 or WMA Files from USB
This section describes how to use your radio to access and
playback your audio files via USB memory devices. USB slots are
located on top of the unit. This is opened by lifting the rubber cover
on top of the radio.
Important:
Your radio is only designed to work with USB memory
flash memory devices. It is not intended to be connected to hard
disk drives or any other type of USB device.
It is possible to use SD or SDHC cards for media playback when
held in a suitable USB adaptor. However, due to the wide variation
of such adaptors, it is not possible to guarantee that all adaptor /
card combinations will work with the radio.
The unit has been tested with a range of USB memory devices of
up to 3GB capacity. USB memory must use the FAT or FAT 3
filing system in order to operate with the sound system.
Audio formats supported for playback are MP3 and WMA .
Playback does not support files encoded using WMA lossless,
WMA Voice, WMA 0 professional, nor files of any format which
have DRM protection.
Cautions:
In order to minimize the risk of damage to your radio, your USB
Memory, please place the unit such that the device cannot easily
be knocked while it is inserted in the socket.
Remove the USB before carrying the unit or if not using the USB
feature for a prolonged period.
Place the unit in Standby mode removing your USB memory
device.
The USB connection is intended only for flash memory devices.
The use of hard disk storage media is not supported.
Play back via USB files stored on MP3 players is not guarantee.