Sangean HDR-18, User Manual

Page: 18 / 21

17
Nap timer
1. Press and hold the Nap timer button to enter the adjustment mode.
2. Rotate the Tuning control knob to select your desired Nap time (1-120
minutes).
3. Press the Tuning control knob to confirm the setting. ‘NAP’ symbol
will show on the display.
4. To view the remaining time of an active timer setting, press the Nap
timer button. To cancel a sounding Nap timer, press the Standby
button. If any button other than the Standby button is pressed when
the alarm is sounding, snooze function will be activated. To cancel
the function when countdown is progressing, go to nap timer setting
menu and select ‘Off’.
5. You can view or change the On/Off status of the Nap timer by
pressing the Nap timer button.
Tone control- treble and bass
You can set up a custom treble and bass setting to your liking.
1. Make sure your radio is turned on. Press the Volume control knob to
enter the bass adjustment mode.
2. Rotate the Volume control knob until the desired level (between -5
and +5) is displayed. The sound will change as you adjust the level.
Press the Volume control knob to confirm the setting. You will enter
the treble adjustment mode.
3. Rotate the Volume control knob until the desired level (between -5
and +5) is displayed. Press the Volume control knob to confirm the
treble setting.
Loudness
You can get compensation on lower and higher frequency for your radio
by adjusting the Loudness function.
1. Repeatedly pressing the Menu button until ‘Loudness’ is shown on
the display.
2. Rotate the Tuning control knob to select ‘On’ to turn on the loudness
function or ‘Off’ to turn off the function.
3. Press the Tuning control knob to confirm the setting.
Contrast
The contrast of the display can be adjusted.
1. Repeatedly pressing the Menu button until ‘Contrast’ is shown on the
display.
2. Rotate the Tuning control knob to adjust the contrast. The contrast
level indication on the screen will change at the same time. When
you find the setting that gives the best legibility for the location in
which the radio is used, press the Tuning control knob to save the
setting.
Language
Your radio can be configured to a different language.
1. Repeatedly pressing the Menu button until ‘Language’ is shown on
the display.
2. Rotate the Tuning control knob to select your required language.
3. Press the Tuning control knob to confirm your selection. The display
will change to the chosen language.