Sangean HDR-18, User Manual

Page: 17 / 21

16
GB
5. Rotate the Tuning control knob to choose the desired source for the
alarm (FM, AM or BUZZER). Press the Tuning control knob to confirm
the setting. If setting alarm to Buzzer proceed to step 7.
6. When selecting the alarm for FM or AM, rotate the Tuning control
knob to choose your required wake-up station or press the desired
Preset button (1-10). Then press the Tuning control knob to confirm
your selection.
7. Rotate the Tuning control knob to choose your desired volume and
press the Tuning control knob to confirm the setting. Your radio will
show ‘Alarm 1 Saved’ for instance and exit the alarm setting screen.
The ‘Alarm 1’ indicator
will show on the display.
8. To view or quick change the On/Off status of the alarm, press and
release the Alarm 1 (or Alarm2) button.
When the alarm sounds
To cancel a sounding alarm, press the Standby button to cancel a
sounding alarm.
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for 1 minute and silence for 1
minute in repetition for 60 minutes unless cancelled.
When the radio alarm is activated, the alarm will go off in Humane
Waking System. It will increase its volume from 0 to your set volume.
The ‘Alarm 1’ indicator
or ‘Alarm 2’ indicator will highlight on the
display.
Disabling/canceling alarm setting
To cancel the alarm setting before the alarm sounds, firstly, press the
corresponding alarm button (i.e. alarm 1 or alarm 2 button) to enter the
alarm setting screen and then press the same button again to highlight
‘Off’. The alarm indicator will disappear from the screen and the chosen
alarm will now be disabled.
Snooze
The buzzer or radio alarm can be silenced for 5 minutes by pressing
any button other than the Standby button. In order to cancel the Snooze
timer while the alarm is suspended, press the Standby button.
Sleep timer
Your radio can be set to turn off after a preset time has elapsed. The
sleep timer setting can be adjusted between 15 and 180 minutes.
1. Press and hold the Sleep timer button to enter the sleep setup. ‘Set
sleep time’ will appear on the display.
2. Rotate the Tuning control knob to select the desired sleep time . The
options are 60, 90, 120, 150, 180, off, 15, 30. Press the Tuning
control knob to confirm the setting. Use the Off option to cancel the
sleep function. Your radio will switch into standby mode after the
preset time has elapsed. An active sleep timer is shown using a sleep
timer indicator (
) on the playing display. To view the remaining
time of an active sleep timer setting, press the sleep timer button.
3. To cancel the sleep time before the preset time has elapsed and
to turn off the radio, press the Standby button to turn the unit off
manually. To cancel the sleep timer and leave the radio playing, go
back to the sleep timer settings (step 1 to 2) and select the Off option
in step 2.
4. You can view or change the On/Off status of the Sleep timer by
pressing the Sleep timer button.