8
Radio Controls
1. To turn the radio on press the “Power” button on the remote control
or hold “Power /Control knob” on the unit for 2 seconds.
2. To turn the radio off press the “Power” button on the remote control
or hold “Power /Control knob” on the unit for 2 seconds. (NOTE: In
standby mode, the tuner will display the time, dim the backlight
(in 12 seconds) and standby LED will be on.
3. To access or select the menu option press and release the
Power/ Control knob on the unit or “Enter” button on the remote.
4. To navigate through the menu options rotate the “Power/Control knob”
or press “Tuning” Up/Down button.
5. During normal operation (not in the menu tree) the “Power/Control
knob” will control volume.
Selecting the radio band/Auxiliary Input
Using the remote, press the “BAND” button. (Note: When you
switch from one band to another, the radio will return to the last
tuned station used in the band.)
Using the Unit:
1. Press “Power/Control knob” and cycle through the menu options
by rotating the “Power/Control knob” until you are at “Band”
menu option.
2. Press “Power/Control knob to select. Repeat until desired band
is reached.
Note:
When AUX IN socket behind the unit is connected, Display will cycle
through AM FM AUX IN AM …………
Manual Tuning
Using Remote:
1. Press the Tuning rocker switch UP or DOWN on the remote control
to select a radio station. Tuning step per press for AM is 10 kHz
and 100 kHz for FM band.
Using the Unit:
1. Press “Power/Control knob” and cycle through the menu options by
rotating the “Power/Control knob” until you are at “Tune” menu option.
2. Press “Power/Control knob to select.
3. Rotate “Power/Control knob” until you reach desired station
frequency.
20070524_HDR-1_381QB0SB-A_GB.p65
2007/5/24, ¤U¤È 03:20
11
