15
Setting and Recalling Memory Presets
Preset stations
There are 10 preset stations each for AM and FM.
Setting Memory Presets
Using the Remote:
1. Press “Band” button to select desired band.
2. Hold corresponding numbered button for 2 seconds to store. i.e.
to store 93.1 into memory position 2 press and hold the “#2” button
on the remote.
Using the Unit:
1. Press “Power/Control knob” and cycle through the menu options
by rotating the “Power/Control knob” until you are at “SET PRESET”
menu option.
2. Press “Power/Control knob” to select.
3. Rotate “Power/Control knob” to cycle through the preset options until
you reach the desired location.
4. Press “Power/Control knob” to select.
Recalling Memory Presets
Using the Remote:
1. Press corresponding numbered button to the memory location. i.e.
to recall 93.1 stored in preset number 2 press and release the
“#2” button.
Using the Unit
1. Press “Power/Control knob” and cycle through the menu options by
rotating the “Power/Control knob” until you are at “GO-TO PRESET”
menu option.
2. Press “Power/Control knob” to select.
3. Rotate “Power/Control knob” to cycle through the preset options until
you reach the desired location.
4. Press “Power/Control knob” to select.
Note:
If preset stations are full, display will appear Preset Full. Press another
2 seconds will replace previous memory station. Display will show
“P-X stored”. To give up the preset, simply release the number button
when Preset Full appears, display will return to frequency status.
20070524_HDR-1_381QB0SB-A_GB.p65
2007/5/24, ¤U¤È 03:20
18
