Sangean DT-400WAM, Manual

Page: 7 / 11

6
Battery Installation
•
Turn radio off.
•
Prepare replacement batteries to ensure a quick and easy change.
Failure to change batteries within 1 minute will reset presets and
clock settings.
•
The battery cover is located on the back of the unit. Apply a gentle
downward pressure and slide the door to the right side of the unit.
•
Place 2 ‘AA’ batteries inside the unit oriented to the illustration
located just below the battery compartment.
NOTE:
A flashing “E” appearing on the LCD display indicates a weak battery
and that replacement of batteries is required. And the
Weather Alert
will be deactivated .
Tuning the Radio
Seek Tuning
•
Turn radio on using the On/Off button located on the top of the
radio.
•
Select desired band by pressing the “Band” selector on the front of
the unit.
•
Press and hold the proper tuning button (Up/Down) for
approximately ½ second. Radio will seek for next active signal
station.
•
Repeat as many times as desired.
Manual Step Tuning
•
Turn radio on using the On/Off button located on the top of the
radio.
•
Select desired band by pressing the “Band” selector on the front of
the unit.
•
Press the desired tuning button (Up/Down) repeatedly until desired
frequency is found.