background image

A Few Words about Batteries...

Your radio has been designed to use a choice of power sources. 

You may plug it into the mains using the supplied high-efficiency adap

-

tor, or for listening away from the mains you may use either alkaline or 
rechargeable batteries. We do not recommend the use of carbon-zinc or 
zinc-chloride batteries. 

It  is  very  important  that  you  read  the  advice  and  warnings  given 
below. 

) Whichever type of batteries you choose to use, it is very important that
    the battery selection switch under the cover is set to the correct type. 

a. If no batteries are fitted, then set the switch to the Alkaline position (to

    the left as viewed from the back of the radio). This position minimises
    the power consumption when the radio is powered from the mains. 
b. If Alkaline batteries are fitted, then set the switch to the Alkaline
    position (to the left as viewed from the back of the radio). 

c. If Rechargeable batteries are fitted, then set the switch to the NiMH

    position (to the right as viewed from the back of the radio). Your radio
    is designed to use Nickel-Metal-Hydride rechargeable batteries. 
    No other type of rechargeable battery should be used in the radio. 

NEVER

 mix old and new Alkaline batteries. The old batteries may

    suffer damage and leak which will damage your radio and whatever
    the radio is standing on. 

3) 

NEVER

 mix old and new Rechargeable batteries. This may result in

    unreliable charging and shortened battery life. Never mix Rechargeable
    batteries of different types or capacities even if they are new. 

4) 

NEVER

 mix Alkaline and Rechargeable batteries. The recharging of

    Alkaline batteries can be very dangerous. 

Rechargeable batteries 

Your radio uses a range of methods to ensure correct and safe charging 
of Rechargeable Nickel-Metal-Hydride batteries. 
These  work  to  protect  your  batteries  from  excessive  charge  and  dis-
charge. These protections can only work properly if the advice above is 
followed. In particular, the radio will not be able to correctly charge bat-
teries if they are a mixture of different brands, or different ages, 
or different capacities. 

We  recommend  that  all  the  rechargeable  batteries  used  in  your  radio 
are bought together as a set. They should always be charged together 
and discharged together and not “borrowed” from time to time for other 
applications. This will ensure that they give their optimum performance 
in your radio. 

We recommend that the rechargeable batteries that you use should be 
from a quality brand, and should be of at least 000mAh capacity. Bat-
teries of this capacity should be able to power your radio for between 
0 and 0 hours depending upon the volume of the radio, whether DAB 
or FM mode is used (DAB mode uses slightly less power than FM), and 
also depending on the condition of the batteries. 

Before you first install a new set of rechargeable batteries into your ra

-

dio you should first make sure that the battery type switch beneath the 

battery cover is in the NiMH position. Install the batteries arranging them 
as shown on the back of the radio. Plug the mains adaptor into a mains 
socket and then into the radio. While the batteries are charging the bat-
tery  indicator  should  show  a  flashing  green  light.  When  the  batteries 

are fully charged the indicator will stop flashing and will show a steady 

green light. The time taken to charge the batteries will depend on how 
much charging they require. New batteries may be partly charged when 

first fitted, but it is normal for a set of batteries to take several hours to 

charge fully (this can be between 5 and 8 hours depending on the bat-
tery capacity and their initial state of charge). 

Summary of Contents for DPR-68


























Reviews: