Sangean DDR-66BT Instruction Manual Download Page 14

Page: 14 / 116

6. Press the Tuning Up or Down buttons on the panel (Alternatively, the Folder Up or Down

buttons on the remote control handset) to choose an auto-update option for the clock. This

can be updated from DAB or FM radio, from the Network, or not updated. The default is to

auto update from the network. If you choose any other option, go to step 9. Otherwise you

will first need to select the correct time zone and daylight savings setting, see steps 7 and

8. If you choose “No update” you will need to set the clock manually later (see the section of

‘Manually setting the clock’). Press the Select button to confirm your choice.

7. Press the Tuning Up or Down buttons on the panel (Folder Up or Down buttons on the

remote control handset) to highlight the time zone which is applicable to your location. Press

the Select button to enter the setting.

8. You will then need to set the Daylight Savings option according to your location (Daylight

Savings is also known as Summer/Winter time). Press the Folder Up or Down buttons on the

remote control handset to highlight “YES” to turn on daylight savings if required or ‘NO’ if you

do not wish to use daylight savings then press the Select button to confirm the setting.

9. After setting the Daylight Savings options, the display will show the 'Keep network

connected?' option. You should choose 'Yes' if you wish to keep the radio connected to the

network when it is in Standby mode. This will allow remote control software to switch on your

radio when needed. If you choose 'No' then your radio will shut down its WiFi connection

when it is in Standby, DAB or FM modes. This minimises power consumption but it does

mean that you will need to switch the radio on manually in order to use either Spotify

Connect, the 'Play to' function or any remote control software such as UNDOK app. Press

the Folder up/down button to highlight the required option and then press the Select button to

make the selection.

10. The display will then show a list of WiFi regional options for the network set up. Press the

TuningUp or Down buttons on the panel (Alternatively, the Folder Up or Down buttons on

the remote control handset) to highlight the required region and then press the Select button

to select it. Do this even if planning to use the wired Ethernet connection. Your radio will

then scan for available WiFi networks. If using WiFi we recommend that the WiFi antenna is

positioned vertically.

11. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short

while the display will show a list of the available WiFi networks. If you are intending to use the

WiFi connection, go to step 12.

To use the Ethernet connection to your router (with automatic configuration). Press the Folder

Up or Down buttons on the remote control handset to point to the “[Wired]’ menu item. Press

the Select button and the radio will attempt to connect.

Auto update

Update from DAB
Update from FM
Update from Network
No update

Set timezone

UTC+00:00:Dublin,Lon
UTC+00:30:
UTC+01:00:Madrid,Arr
UTC+01:30:
UTC+02:00:Athens,Ca...

Wlan region

Most of Europe
USA
Canada
Spain
France

SSID

Smith
Jones
[Rescan]
[Wired]
[Manual config]

Network wizard
Scanning...

Network settings

Daylight savings

Keep network connected?

Network settings

Waiting for
Ethernet

Please wait

Summary of Contents for DDR-66BT





















































































































Search results

Summary of Contents for DDR-66BT

Reviews:

Related manuals for DDR-66BT

Brands by name

Popular brands

Sangean DDR-66BT, Instruction Manual

Search results

Summary of Contents for DDR-66BT

Reviews:

Related manuals for DDR-66BT

Brands by name

Popular brands